FDE Cerakote Billet AR-15 80% Lower Receiver 7075, 5.56/.223/300BO
**NOTE: Cerakote can have a slightly different tint from batch to batch, the only way we can guarantee the color of this upper will match your lower, is if you buy your upper and lower in the same order from us.
These lowers start their lives as a billet block of 7075 Aluminum. The block then goes to machining where it is turned into a raw 80% lower with a fixed trigger guard. From there the mag well gets broached and then the lower is off to anodizing where they get a Type III hard coat anodized finish. After the lower is anodized it is bead blasted and Cerakoted Magpul FDE.
These are very high quality and you should get them while you can. Get them while you can!
All machining processes have been completed and within spec except for the following:
1. Milling out the receiver interior (Fire Control Cavity).
2. Cutting of the Trigger Slot (Trigger Through Hole)
3. Drilling of the Trigger Pin Hole
4. Drilling of the Hammer Pin Hole
5. Drilling of the Selector Hole
All other Machining process are complete to Spec, all other machine work has been completed.
Made of 7075 T6 Aluminium here in the U.S.A.
These lowers do have the rear pocket cut.
It is unlikely you will find a anodized billet lower cheaper any where else.
This lower is compatible with the 80% Arms Easy Jig.
This lower is compatible with the Blitzkrieg Tactical drill press/mill jig.